Gasboy Q Series Manual do Utilizador descarregar pdf

020897 Rev. 06/12/03 Page 1

INSTALLING THE SUMP OVERFLOW CHECK VALVE

FOR Q SERIES SINGLE PUMPS

KIT #023900

023900 Kit Contents

Item Part No. Description

1 023997 Assembly, Sump Overflow Check Valve

2 020701 Vent Tube

3 020700 Assembly, Vent Tube

4 015191 Bracket, Sump Overflow

5 020702 Hanger, Conduit Size, 1-1/2"

6 051866 Screw, 1/4-20 x 1-1/4 HHC Pl

7 038860 Nut, 1/4-20 Hex

8 053919 Screw, 1/4-20 x 1/2 HH Taptite

9 026044 Fitting, 3/8 Elbow, Inverted Flared

10 058021 Grommet

11 020897 Instruction sheet (this sheet)

1. Turn off power to the pump. Unlock and open the doors. Trip the shear valve’s poppet to prevent fuel flow into

the pump.

2. Pre-assemble the conduit hanger (item 5) to the bracket (item 4)

using a ¼-20 x ½ Taptite screw (item 8). (NOTE: use the hole

that is ½” from the edge.) (Figure 1)

Figure 1

3. Slide the sump over flow assembly (item 1) into the conduit

hanger. Using the ¼-20 x 1-1/4 screw (item 6) and ¼” nut (item

7) to secure the sump over flow assembly loosely in place.

(Figure 2)

Figure 2

1 2 3

020897 Rev. 06/12/03 Page 1INSTALLING THE SUMP OVERFLOW CHECK VALVEFOR Q SERIES SINGLE PUMPSKIT #023900023900 Kit ContentsItem Part No. Description1

020897 Rev. 06/12/03 Page 24. Behind the junction box, disconnect the existing vent tube andremove the existing compression elbow in the pumping un

020897 Rev. 06/12/03 Page 37. Install/insert the grommet (item 10) into the existing vent hole inthe left side column (view from junction box side)

Sem comentários

Gasboy Q Series Manual do Utilizador