Gasboy 1000 Series to FleetKey Conversion Manual Manual do Utilizador Página 1

Consulte online ou descarregue Manual do Utilizador para Hardware Gasboy 1000 Series to FleetKey Conversion Manual. Gasboy 1000 Series to FleetKey Conversion Manual User Manual Manual do Utilizador

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 22
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 0


SERIES 1000
TO FLEETKEY CONVERSION
MANUAL
C35328
GASBOY INTERNATIONAL LLC
Vista de página 0
1 2 3 4 5 6 ... 21 22

Resumo do Conteúdo

Página 1 - GASBOY INTERNATIONAL LLC

 SERIES 1000 TO FLEETKEY CONVERSION MANUAL C35328 GASBOY INTERNATIONAL LLC

Página 2 - Rev. 03/07/03

Series 1000 to FleetKey Conversion 03/07/03 55. Working inside the head of the unit, remove the 2 screws which secure the optical reader bracket to

Página 3

GASBOY FleetKey 6 03/07/03 INSTALLATION OF KEY SYSTEM 1. From the conversion kit, press the Trim Edge Material onto the bottom edge of the PCB Mo

Página 4 - CONTENTS

Series 1000 to FleetKey Conversion 03/07/03 78. Install the 10-position Key Receptacle Ribbon Cable(s) by inserting one end into the top of the Key

Página 5

GASBOY FleetKey 8 03/07/03 14. There is a set of operating instructions silkscreened to the right of the keypad on the face of the Series 1000.

Página 6 - IN THIS MANUAL

Series 1000 to FleetKey Conversion 03/07/03 9

Página 7

GASBOY FleetKey 10 03/07/03 POWER ON AND TEST 1. When you have finished installing the conversion kit, turn on the power for the Series 1000 Syst

Página 8

Series 1000 to FleetKey Conversion 03/07/03 11START-UP COMMANDS Use the following commands to set up the system at the initial start-up. The Serie

Página 9 - CONVERSION INSTRUCTIONS

GASBOY FleetKey 12 03/07/03 4. Type SC to load your system configuration data. ↵↵ ↵ ↵↵↵↵↵↵↵↵↵↵↵↵↵↵↵↵↵↵↵ NOTE: Additional system configuration pro

Página 10

Series 1000 to FleetKey Conversion 03/07/03 135. Type CT to clear the key receptacle read and error table. ↵ 6. Type RT to initialize the transacti

Página 11 - INSTALLATION OF KEY SYSTEM

GASBOY FleetKey 14 03/07/03 10. Type WK to load the 4-digit working key that is assigned to your system at the time of order. This is used in calc

Página 12

 GASBOY Series 1000 to FleetKey Conversion Manual C35328 Rev. 03/07/03 Copyright 2003 by Gasboy International

Página 13

Series 1000 to FleetKey Conversion 03/07/03 1514. Type LP to assign specific fuels, prices, tanks, totalizer readings, and timeouts to your pumps.

Página 14 - 03/07/03

GASBOY FleetKey 16 03/07/03 16. Type LL to assign the maximum fuel quantities to the limitation codes. For initial start-up, assign quantities to

Página 15 - POWER ON AND TEST

GW01 - 6/04/02 Rev. 1 WARRANTY General Statements: Gasboy International LLC. warrants all new equipment manufactured by Gasboy against defective ma

Página 17

03/07/03 Contents-1 CONTENTS IN THIS MANUAL ... 1 CONT

Página 19

03/07/03 1 SERIES 1000 TO FLEETKEY CONVERSION IN THIS MANUAL The instructions in this manual are provided to assist the system operator in t

Página 20

GASBOY FleetKey 2 03/07/03 CONTENTS OF THE CONVERSION KIT Depending on the FleetKey system you ordered and the features of your current Series 100

Página 21 - WHERE TO GO FROM HERE

Series 1000 to FleetKey Conversion 03/07/03 3

Página 22 - WARRANTY

GASBOY FleetKey 4 03/07/03 CONVERSION INSTRUCTIONS Use the following instructions to convert your system. The first two subsections detail remova

Comentários a estes Manuais

Sem comentários